Don’t make or receive phone calls while driving.
Never text while driving.
Keep your phone at least 5 mm away from your ear
or body while making calls.
Small parts may cause choking.
Your phone can produce a loud sound.
To prevent possible hearing damage, do not listen at
high volume levels for long periods.
Avoid contact with anything magnetic.
Keep away from pacemakers and other electronic
medical devices.
Turn off when asked to in hospitals and
medical facilities.
Turn off when told to on aircraft and at airport.
Turn off when near explosive materials or liquids.
Don’t use at gas stations.
Your phone may produce a bright or flashing light.
Don’t dispose of your phone in fire.
Avoid extreme temperatures.
Avoid contact with liquids. Keep your phone dry.
Do not attempt to disassemble your phone.
Only use approved accessories.
Don’t rely on your phone as a primary device for
emergency communications.
Product Safety Information
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines were
developed by the independent scientific organization ICNIRP
and include safety margins designed to assure the protection of
all persons, regardless of age and health.
The guidelines use a unit of measurement known as Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/
kg and the highest SAR value for this device when tested at the
head was 0.394 W/kg*, and when tested at the body was 1.806
W/kg*. As mobile devices offer a range of functions, they can be
used in other positions, such as on the body as described in the
user manual**.
As SAR is measured utilising the device’s highest transmitting power,
the actual SAR of this device while operating is typically below
that indicated above. This is due to automatic changes to the
power level of the device to ensure it only uses the minimum
power required to communicate with the network.
* The tests are carried out in accordance with EN 50360, EN
50566, EN 62479, EN 62209-1 and EN 62209-2.
** Please see body worn operation in the user manual.
FNB proudly brings you the ConeXis X1 smartphone, exclusively
designed by ZTE for the FNB customer. FNB & ZTE are committed to
providing an integrated end-to-end innovative product solution that
delivers mobile excellence and value while introducing you to cutting
edge mobile technology coupled with end-to-end banking solutions.
For more information on FNB and ZTE visit them online:
First National Bank - www.fnb.co.za <http://www.fnb.co.za>
ZTE Corporation - www.zte.com.cn <http://www.zte.com.cn >
Specific Absorption Rate (SAR)
NOTE:
If the battery is extremely low, you may be unable to power
on the phone even when it is being charged. In this case,
try again after charging the phone for at least 20 minutes.
Contact Customer Service if you still cannot power on the
phone after prolonged charging.
If the screen freezes or takes too long to respond, try pressing
and holding the
Power
key for about 10 seconds to restart
the phone.
First National Bank - a division of FirstRand Bank Limited.
An AuthorisedFinancial Services and Credit Provider (NCRCP20).
Copyright © 2016 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted, reproduced, translated or
used in any form or by any means, electronic or mechanical, including
photocopying and microfilm, without the prior written permission of
ZTE Corporation.
Disclaimer
ZTE Corporation expressly disclaims any liability for faults and
damages caused by unauthorised modifications of the software.
Images and screenshots used in this guide may differ from the actual
product. Content in this guide may differ from the actual product or
software.
Trademarks
ZTE and the ZTE logos are trademarks of ZTE Corporation.
Google and Android are trademarks of Google, Inc.
The Bluetooth® trademark and logos are owned by the Bluetooth SIG,
Inc. and any use of such trademarks by ZTE Corporation is
under license.
Qualcomm® Snapdragon™ processors are products of Qualcomm
Technologies, Inc.
Qualcomm and Snapdragon are trademarks of Qualcomm
Incorporated, registered in the United States and other countries.
Used with permission.
Other trademarks and trade names are the property of their
respective owners.
Version No.:
R1.0
Edition Time :
May 21, 2016
Manual no.:
079584508134
microSDXC Logo is a trademark of SD-3C, LLC.
Legal Information
Quick Start
Guide
