Zte F285 User Manual Download

Page: 53 / 79

7.1.2 Headset Autoanswer

You can set headset to answer an incoming call automatically.

1. Select

Menu

→

Profiles

→

Headset

→

Profile Edit

→

Auto

Answer

2. Select option and press

Left select key

OK key

Off:

No headset autoanswer.

After 5 Seconds:

Call will be connected after 5 seconds

After 10 Seconds:

Call will be automatically answer after 10

7.1.3 Alert Type

You can select alert type for an incoming call, earpiece and

message.

1. Select

Menu

→

Profiles

→

Headset

→

Profile Edit

→

Alert type

2. Select an option in list:

－

Ring+Vibrate:

Set mobile phone in ten-second vibration case,

then continuous Ringer later to prompt incoming call.

Ring Tone:

Set the phone in Ringer case to prompt.

Vibrate:

Set the phone in vibration case to prompt.

Silent:

Set the phone in silence case with backlighting to prompt.

One Beep Mode:

Set the phone Beep only once.

Ascending:

The phone rings with an ascending sound.

Note:

Type of “Ring +Vibra” for message is as same as type of

“Vibrate”.

Summary of Contents for F285
















































































Search results

Summary of Contents for F285

Reviews:

Related manuals for F285

Brands by name

Popular brands

Zte F285, User Manual

Search results

Summary of Contents for F285

Reviews:

Related manuals for F285

Brands by name

Popular brands