2.
After the above configuration, click "
create
" button to complete the Static IP
broadband Internet access settings.
5.2
Broadband Internet Access In Bridge Mode
ZTE solution ONU series products factory default mode in the bridge (pure data
SFU), ONU bridge mode Internet does not need to do any configuration in the web
interface. Just configure the correct ONU port vlan (eg access, trunk, transparent)
in the OLT
Note:
If ONU was in route mode for Internet. Please disable ONU’s DHCP function
if need change to bridge mode. It is best to delete route WAN configuration.
5.3
View Broadband WAN Status
web login ONU and select the
status -> Network interface -> WAN
Connection
, you can see the status of the WAN connection in the routing mode,
check whether the routing WAN has the correct IP address, and whether the bridge
WAN status is "UP"
