23
• Charge the battery, and keep the phone connected to
the charger.
• Schedule an hour or more for the encryption process,
because you MUST NOT interrupt it or you will lose some
or all of your data.
When you’re ready to turn on encryption:
1. From the home screen, tap
Settings Security
Encrypt phone
.
2. Read the information about encryption carefully. You will
not be able to proceed if your battery is not charged or your
phone is not connected to the charger. If you change your
mind about encrypting your phone, press the
Back key
.
Warning!
If you interrupt the encryption process, you will lose
your data.
3. Tap
ENCRYPT PHONE
.
4. Draw your screen lock pattern or enter your PIN or password.
5. Tap
ENCRYPT PHONE
again.
The encryption process will begin. Encryption can take an hour
or more, during which time your phone may restart several
times and MUST NOT be interrupted.
6. When encryption is completed and a prompt appears on
the screen, draw your unlock pattern or enter your PIN
or password.
From this point on, each time you power on your phone, you
must draw your unlock pattern or enter your PIN or password
to decrypt the phone.
PERSONALIZING
Summary of Contents for AT&T Maven 3
Page 1: ...User Guide ...
Page 146: ......