Zte A002ZT, User Manual

Page: 72 / 128

70
Setting IP Address and Port Filtering
Set whether to apply rules and allow transmissions from Internet through firewall, based on sender/receiver addresses.
Settable items are the following.
Item Description
Source IP Address
Set source IP address to apply rules; specify IP address from IP addresses used on LAN. Use
wildcard. "any" or empty address cannot be set.
Source Port Range
Set source port number to apply rules.
If protocol set to
TCP / UDP , specify lowest and highest values.
Empty address cannot be set as port range.
Dest. IP Address
Set destination IP address to apply rules.
Use wildcard. "any" or empty address cannot be set.
Dest. Port Range
Set destination port number to apply rules.
If protocol set to
TCP / UDP , specify lowest and highest values.
Empty address cannot be set as port range.
Protocol Select protocol to apply rules.
Status Set whether to apply rules.
IP Settings Make IPv4/IPv6 settings.
Options Save, edit, or delete rules.
Settings tab Device Firewall
・See " Firewall Settings " and enable firewall before making settings.