ZTE-G i799, User Manual, Page: 49 / 61

錯誤
!
使用
[
常用
]
索引標籤將 标题
1
套用到您想要在此處顯示的文字。
41
Network” and “Selection Mode”. Under “Selection Mode”, you could select
“Automatic” or “Manual”.
GPRS Connection
Press left soft key
“Change” to switch between “When Needed” and “Always”.
Security Setup
You need to input the password
“0000” to enter “Security Setup”.
SIM Lock

If
“SIM Lock” is currently set “OFF”, select “ON” to input PIN code to
unlock your SIM card. You need input correct PIN code to unlock
your SIM card as you turn on your mobile phone next time.
 If
“SIM Lock” is set “ON”, select “OFF” to cancel the protection.
Note:
Your SIM card will be locked if you enter wrong PIN code
continuously for three times. In this case you need PUK
code to unlock your SIM card.
The PIN code, PUK code and SIM card may be provided
to you all together. If not, contact your network provider.
The default PIN code is normally 1234. Please change to
your own PIN code as soon as possible.
Phone Lock
Phone Lock could prevent your mobile phone against illegal use.
 Select
“Power On” to input the password. You need input correct