Page 1
START HERE
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION.
Auto makers offer varied models to each vehicle and occasionally manufacture
more than one body style of the same model. To assure your part is correct; our tech
department can be contacted at [email protected] to verify fitment and assist with
technical questions. All other inquires can be directed to [email protected]. In the
event you do not have internet access please call 844-653-8040
* APPLICATION MODELS VARY. WE RECOMMEND TO VERIFY FITMENT BEFORE BEGINING INSTALLATION PROCESS.
* IMAGES FEATURED IN THE INSTRUCTION DOCUMENTS MAY NOT ALWAYS EXACTLY MATCH YOUR MODEL OR PART.
Parts included
HARDWARE
Installation Guide
Parts are PATENT PENDING. All Rights Reserved - Copyright ©2016 - ZROADZ LED, INC.
20
21
FOR
D BRONCO
(ALL)
Z
745401, Z7454
2
1
ROCK SLIDER SIDE STEPS
STEP
2
Z745401
(4 Door)
(12) 10 M
m
Flange Nut
(2) 10 Mm Bolt
(
4
) 8 M
m
Bolt
Z7454
2
1 (2 Door)
(8) 10 M
m
Flange Nut
(2) 10 Mm Bolt
(
2
) 8 M
m
Bolt
Z
74540
1 (4 DOOR)
(1) - Left Rock Slider Side Step
(1) - Right Rock Slider Side Step
Z7454
2
1 (2 DOOR)
(1) - Left Rock Slider Side Step
(1) - Right Rock Slider Side Step
2)
Remove the factory Rock Rails.
STEP 1
1)
Skip to Step 3 if
your vehicle is
not
equipped
with
the factory Rock Rails
. If they
are equipped,
remove them by
c
arefully
untighten
ing
the single
bolt
and
the (2) nuts
at each attachment
point.
The 2 Door Bronco has a front and a rear
attachment point on each side whereas the
4 Door Bronco has a front, middle and rear
attachment point on each side. All horizontal
bolts are 6 Mm in size and in turn use 10
Mm Flange Nuts. The vertical bolts vary in
size depending on their position. Only the
front attachment points use the vertical 10
Mm bolts. The other vertical attachment
points use an 8 Mm bolt.
tools required
Drive Ratchet
10
M
m Socket
13
M
m Socket
