Quick Install Guide
ZPESYSTEMS.COM
Smoke Detector (USB)
ZPE-SMK-U01
COMPATIBLE WITH
ALL NODEGRID DEVICES
HARDWARE
Smoke Sensitivity
Complies with EN 54-7:2000+ A1:2002
Protection
IP30 Ingress
Requirements
ZPE-IO8-U01 & ZPE-RL4-U01
SOLD SEPARATELY
Must be installed to the Nodegrid environment
prior to setting up Smoke Detector
Supply Voltage
12V with USB Adapter
Operating
-10º to 55° C (14º to 131º F)
Temperature & Humidity
93±3% at 40° C (104º F)
Cables
Relay & Power
Relay
&
Power
Extension:
4 meters (13 feet)
IO Extension Cable: 4 meters (13 feet)
USB
Adapter:
1
meter
(3.33
feet)
DESCRIPTION
Detects smoke in the local environment. Use in conjunction with
ZPE 4-Channel Relay and 8-Channel GPIO Modules (USB-powered).
Sends notification when the detector is triggered and remotely powers off.
Control and read status with CLI, WebUI, SNMP, or Restful APIs.
All rights reserved. September 8, 2022
ASSEMBLED IN THE USA
ZPESYSTEMS.COM +1.844.4ZPESYS
Product Specifications
ZPE-SMK-U01
We suggest placing
this product here
*Rack cage may be a different model or size.
FOR MOUNTING
a. Detach base from unit.
b. Mount base with screws, top down and parallel
to the ground.
c. Reattach top cover.