background image

ZOTAC ZBOX  

4

    

Safety information

Your ZOTAC ZBOX  is designed and tested to meet the latest standards of safety for information tech-

nology equipment. However, to ensure your safety, it is important that you read the following safety 

instructions.

Setting up your system

 

™

Read and follow all instructions in the documentation before operating your system.

 

™

Do not use this product near water or a heat source such as a radiator.

 

™

Set up the system on a stable surface.

 

™

Openings on the chassis are for ventilation. Do not block or cover these openings. Make sure 

you leave plenty of space around the system for ventilation. Never insert objects of any kind into 

the ventilation openings.

 

™

Use this product in environments with ambient temperatures between 0

 and 35

.

 

If you use an extension cord, please use the UL listed cord and make sure that the total 

       ampere rating of the devices plugged into the extension cord does not exceed its ampere 

       rating.

 

Care during use

 

™

Do not walk on the power cord or allow anything to rest on it.

 

™

Do not spill water or any other liquids on your system.

 

™

When the system is turned off, a small amount of electrical current still flows. Always unplug all 

power, modem, and network cables from the power outlets before cleaning the system.

 

™

If you encounter the following technical problems with the product, unplug the power cord and 

contact a qualified service technician or your retailer.

 

¾

The power cord or plug is damaged.

 

¾

Liquid has been spilled onto the system.

 

¾

The system does not function properly even if you follow the operating instructions.

 

¾

The system was dropped or the cabinet is damaged.

Summary of Contents for ZBOX EDGE MI623






















Reviews: