7
2
WALL MOUNTED
REAR VIEW OF CAMERA
5. The Camera (Transmitter) installation is now complete.
TABLETOP BASE
WALL MOUNT
WALL MOUNTED
AWAY FROM TABLETOP BASEPRESS
HERE AND SLIDE CAMERA
DIP SWITCH
PRESET TO CHANNEL 1 POSITION
DESK/TABLETOP
Installing the Camera(Transmitter)///
///
1. Unpack the Camera.
2. Decide whether the Camera will be wall-mounted or sit
on a desk/tabletop. If wall mounting, use drilling template
on the back cover of these instructions. If using the
rtabletop base, attach the camera to the stand as shown.
The Camera can be adjusted for either mounting scenario
by rotating the Camera head to the required position.
3. To use the 12V camera power adapter, connect power jack to the rear of the
tabletop base. Make sure the Camera is within reach of an AC power outlet.
4. Select the Camera operating channel on the DIP switch in the battery
compartment by moving switches1, 2 or 3to the down position. Switch is
preset to channel 1.
IMPORTANT: In order to access the DIP switch in the battery compartment
press the battery compartment and pull down (as shown) in order to easily
remove the Camera from the tabletop base.
2. Try repositioning the camera, monitor or both to im-
prove the reception quality.
3. Reposition other nearby equipment transmitting on
2.4 GHz frequency.
1. Ensure the volume is turned up sufficiently on the
monitor.
2. Make sure the sound is within the microphone range.
3. If the unit emits a loud wailing sound (feeds back),
try moving the camera away from the monitor or angle
the monitor differently.
Audio problems
Specifications ///
Camera (Transmitter)
TV System
NTSC or PAL standard
Integrated Lens
Resolution
Min. Illumination
Current Consumption
Modulation
Channel Selection
Overall Size
Image Sensor
Audio Signal/Noise Ratio
Video Signal/noise Ratio
Frequency Range
High Speed Electronic Shutter
LED
1/4” CMOS
4.3mm, F1.8 fixed focus
360 horizontal TV lines
45db
48db
2.41-2.47GHz
1/60-1/15,000 sec
8 pcs
0.1 Lux
Appromix.180mA
FM
Electronic tuning
2.3”W * 7.3”H * 3.8”D
Monitor
Frequency Range
Panel Display Method
Active matrix TFT-LCD
2.41~2.47GHz
Resolution
480 horizontal TV lines
Screen Size
5.6 inch
Color Configuration
R.G.B stripe, full color
Brightness
300 cd/M
Power Supply
DC 12V, 1A
Overall Size:
6.4”W * 5 . 6 ”H * 2.7”D
