4
Fast, reliable motion detection
4
Built-in vibration sensor
4
Latest S2 security protocol and
AES-128 signal encryption
4
2 alternative power sources:
battery or micro USB
4
Auto-inclusion for instant set-up
4
Visual range test tool
4
Magnetic mount for quick and
flexible installation
4
Adjustable LED indicator
4
Low battery alerts
4
Z-Wave Plus with improved 500
chip for faster and safer wireless
communicatio
n
4
Model Number: ZSE
18
4
Z
-Wave Frequency: 908.42 MHz
4
P
ower: 1 CR123A battery
(3V) or
micro USB
4
R
ange: Up to 100 feet
4
O
perating Temp
.
:
32
-104° F
4
I
nstallation and Use: Indoor only 1. Bring the sensor within direct
range of your Z-Wave gateway
(hub).
2
. Put the Z-Wave hub into
inclusion
mode (not sure how to
do that? [email protected])
.
3
.
Press and release the Z-Wave
button 3 times quickly. The LED
indicator will start blinking fast
and turn solid for a second to
confirm inclusion.
3
.
A new motion sensor will appear
in your device list.
The sensor won’t add to the hub?
Try this:
1. Initiate
EXCLUSION
and click the
Z-Wave button 3 times quickly.
Then try adding it again.
2. Bring the sensor
closer
to your
Z-Wave hub.
3. Click the Z-Wave button on the
sensor
4-5 times
VERY
quickly
when adding it.
1. Bring the sensor within direct
range of your Z-Wave gateway
controller (hub).
2
. Put the Z-Wave hub into
exclusion mode (not sure how to
do that? [email protected])
.
3
.
Press and release the Z-Wave
button on the sensor 3 times as
quickly as possible.
4. Your hub will confirm exclusion
and t
he device will disappear
from your controller's device list
.
reset the device to factory settings.
To complete the reset process
manually,
p
ress and
HOLD
the Z-
Wave button
on the sensor for at
least
20
seconds.
The LED indica-
tor will flash, stay solid, and then
turn off to confirm factory reset.
NOTE:
All previously recorded activity
and
custom settings will be erased from
the
d
evice’s memory.
The sensor’s wake-up interval is set
to 12 hours by default to save
battery life.
Y
ou can change the
wake-up interval in advanced
settings if available in your system.
During wake-up, the sensor recei
-
ves communication from the hub
(setting updates or network infor
-
mation). Long wake-up interval will
not
affect how o en the sensor
reports motion
or vibration
to your
gateway
(hub)
.
MANUAL WAKE-UP
P
ress and
HOLD
the Z-Wave button
for 5 seconds
to wake the device
up. The LED will
start flashing
.
Y
ou may need to wake the sensor
up manually IF:
1. It doesn’t fully configure during
set-up
(status is
not displayed or
errors pop up in your hub’s
interface)
.
2. You change advanced settings for
the sensor and want them to
update
.
tor.
For best results, mount the
sensor within 0 feet from the door
2
and around 7 feet from the ground.
MOTION
SENSOR
ZSE
18
USER MANUAL
www.getzooz.com
FEATURES
SPECIFICATIONS
Z-WAVE CONTROL
Initiate inclusion (pairing) in
the app (or web interface).
ADD DEVICE to your hub
PULL BATTERY TAB OUT
Twist open the cover of
the sensor to access
the battery.
Activating the battery will
automatically put the sensor
into inclusion mode. If it’s not
added within 30 seconds, try
resetting it and including it manually.
MANUAL INCLUSION (PAIRING)
TROUBLESHOOTING
USB
port
Z-Wave button
EXCLUSION (REMOVING DEVICE)
FACTORY RESET
If your primary controller is missing
or inoperable, you may need to
WAKE-UP MODE
MOUNTING
RECOMMENDED:
Use the mount-
ing screw to securely attach the
magnetic base to a flat surface of
your choice.
OR:
Use the adhesive tape to stick the
base to a clean surface
for quick and hassle-
free installation.
POSITIONING
Attach your sensor to
the magnetic base and
position it to cover the
area you wish to moni-
MOTION DETECTION RANGE
25 FEET
13 FEET
13 FEET
See
Settings
for ways to optimize
and customize motion detection
and activity reports.
4
This product should be installed
indoors
upon completion of any
building renovations
.
4
Do not install the
sensor
in a place
with direct sun exposure, high
temperature
,
or humidity
.
4
Keep away from chemicals, water, and
dust
.
4
Ensure the device is never close to any
heat source or open flame to prevent
fire
.
4
Ensure the device is connected to an
electric power source that does not
exceed the maximum load power
.
4
No part of the device may be replaced
or repaired by the user
, except for the
battery.
WARNING
120°
120°
