background image

ZOOM Tri Metal TM-01

Operation Manual

I N D E X

Features--------------------------------------------------------------------------------------------------------------------------------2

Parts and Functions------------------------------------------------------------------------------------------------------4

Connections----------------------------------------------------------------------------------------------------------------------6

Sound Samples--------------------------------------------------------------------------------------------------------------8

TM-01 and Compact Effects--------------------------------------------------------------------------------10

TM-01 and Multi-Effects------------------------------------------------------------------------------------------11

Troubleshooting------------------------------------------------------------------------------------------------------------12

Specifications-----------------------------------------------------------------------------------------------------------------14

Usage Precautions------------------------------------------------------------------------------------------------------15

Safety Precautions-------------------------------------------------------------------------------------------------------16

Summary of Contents for Tri Metal TM-01

















Reviews: