Setting the click (metronome)
The R12 has a metronome with a precount function.
This metronome, which can function during recording and playback, has switchable sounds, a precount on/
off setting and adjustable volume.
Using the click (metronome)
Set whether the click is used during recording and playback.
1.
Tap “On” or “Off” for “Click” on the Project Settings Screen
(→
Opening the screen where various
).
Setting
Explanation
Off
Do not use a click.
On
Use a click.
HINT:
The click can also be switched on/off by pressing
on the Home Screen.
43
Summary of Contents for MultiTrak R12
