manualshive.com logo in svg

Zoom MultiTrak R12, Operation Manual

Share
Download
Zoom MultiTrak R12 Operation Manual Download Page 41

Changing project tempos

This changes the tempo used for the entire song.

1.

Slide the “Tempo” slider or tap 

/

 on the Project Settings Screen 

(→

 

Opening the screen where

various project settings can be made

).

HINT:

• This can be set from 40.0–250.0.
• The tempo set here will be shared by the effects.

• When the Project Settings Screen is open, tapping 

 multiple times will also set the tempo. The

tempo will be calculated from the intervals between 

 taps (tap tempo).

If the project Time Signature is set to 6/8, the tempo sets the length of dotted quarter notes. 

(→

 

Changing

project time signatures

)

• Tapping the tempo/time signature in the Control Bar will also open the Tempo setting of the Project

Settings Screen. 

(→

 

Control Bar overview

)

41

Summary of Contents for MultiTrak R12





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands