Recording
Adjusting the volume display size to make checking
easier
The M2 records using 32-bit float format, making input gain adjustments unnecessary. Depending on the
input signal, however, the volume shown on the display could be too small or too large, making it difficult
to check.
By changing volume amplifications shown on the display, sizes can be adjusted to make checking easier.
Moreover, the sizes of waveforms shown during recording also change recorded volumes.
1.
Use
and
to adjust the size to make the volume easy to check.
The amplification can be checked with
below the waveform.
NOTE
:
• The waveform display size can be adjusted to 11 levels.
• Be careful with the volume if you are monitoring the input sound with headphones, for example.
• Adjusting the amplification during recording will not affect the recording level of that recording.
35
