Zoom G2.1NU Operation Manual Download

Page: 48 / 58

Effect Types and Parameters

ZOOM G2Nu/G2.1Nu

EarlyRef (early reflections)

This effect reproduces only the early reflections of reverb.

PARM1

PARM2

PARM3

Decay

1–30

Shape

−10–10

Mix

0–100

Adjusts the duration of the reverb.

Adjusts the effect envelope. When

negative, it is reversed. At 0, the

effect is a gate reverb. When

positive, it is a decay-type.

Adjusts the amount of effected

sound that is mixed with the

original sound.

MultiTapD (Multi-tap delay)

This effect produces several delay sounds with different delay times.

PARM1

PARM2

PARM3

Time

1–3000 mS

PTTRN (pattern)

1–8

Mix

0–100

Sets the base delay time.

Sets the tap pattern, which varies

from rhythmical to random

patterns.

Adjusts the amount of effected

sound that is mixed with the

original sound.

TOTAL module

Sets parameters for the entire patch.

PatchLvl (patch level)

Sets the overall volume for the patch.

PARM1

P-LVL (patch level)

2–100

Sets the overall patch volume.

RTM (real time modulation)

Sets the module/parameter controlled by the expression pedal (→P27).

PARM1

PARM2

PARM3

DEST (control destination)

MIN (minimum value)

MAX (maximum value)

Sets the module controlled by the

expression pedal.

Sets the value sent to the

parameter when the pedal is fully

up.

Sets the value sent to the

parameter when the pedal is fully

down.

PatchName

Changes the patch name (→P20).

Summary of Contents for G2.1NU



























































Search results

Summary of Contents for G2.1NU

Reviews:

Related manuals for G2.1NU

Brands by name

Popular brands

Zoom G2.1NU, Operation Manual

Search results

Summary of Contents for G2.1NU

Reviews:

Related manuals for G2.1NU

Brands by name

Popular brands