Zoom G2.1NU Operation Manual Download

Page: 31 / 58

ZOOM G2Nu/G2.1Nu

Changing Various Settings (Global Menus)

Set the display backlight and contrast

1. Use the effect type [▼]/[▲] keys to select

"DISPLAY." Use Parameter knob 1 to
adjust the backlight and Parameter knob 2
to adjust the contrast.

Backlight

Contrast

2. When you are done changing the settings,

press the USB/GLOBAL key to turn its

light OFF.

HINT

The backlight and contrast settings will be saved

even when the power is turned OFF.

Setting the battery type

1. Use the effect type [▼]/[▲] keys to select

"BATTERY," and turn Parameter knob 1

to set the battery type to one of the
following.

● ALKALINE

Use this setting for alkaline or oxyride (oxy

nickel hydroxide) batteries.

● NiMH

Use this setting for nickel metal hydride

batteries that can be recharged and reused.

Battery type

NOTE

Set the battery type that you are using in order to

display the remaining battery charge accurately.

2. When you are done changing the setting,

press the USB/GLOBAL key to turn its

light OFF.

HINT

The battery type setting is saved even when the

power is turned OFF.

Check the current version

1. Use the effect type [▼]/[▲] keys to select

"VERSION."

The following screen appears.

2. When you are done checking the version

information, press the USB/GLOBAL key

to turn its light OFF.

HINT

See the next page for how to upgrade the version.

Current version information

Summary of Contents for G2.1NU



























































Search results

Summary of Contents for G2.1NU

Reviews:

Related manuals for G2.1NU

Brands by name

Popular brands

Zoom G2.1NU, Operation Manual

Search results

Summary of Contents for G2.1NU

Reviews:

Related manuals for G2.1NU

Brands by name

Popular brands