10
Setting list
Press
to open the SETTING screen.
Press
–
to open the following settings, which correspond
to the icons.
1. CHAIN (reorder effects)
Effects in the current patch memory are shown in a list, and can be reordered by pressing
–
for the starting location and destination.
2. PATCH (edit patch memory names and adjust volume)
Item
Explanation
CHAR
Change the character at the cursor position in the patch memory name.
Move the cursor position in the patch memory name.
SKIP
Change the type of character at the cursor position in the patch memory name.
VALUE
Adjust the patch memory volume.
3. SAVE (save and swap patch memories)
To save a patch memory by overwriting another patch memory, use
,
and
–
to select the patch memory number. Then, press
and
at the same time.
To swap a patch memory, turn
to select SWAP when conducting the procedure above.
4. SETUP (set operation functions)
Item
Explanation
BPM
Set the tempo used for the effects, rhythms and looper.
AUTO SAVE
This function can automatically save effect parameter changes when they are made.
When OFF, a save confirmation screen will open whenever you switch patch memories.
PRESELECT
Use this function to select a non-adjacent patch memory and switch to it directly. Use
and
to select the patch memory, and press
at the same time.
BANK HOLD
Limit to patch memories in the same bank when using
and
to switch patch
memories.
5. PWR/LCD (make power and the display settings)
Item
Explanation
BATTERY
Set the type of battery used so the amount of remaining battery charge can be
accurately shown.
ECO
The power can automatically turn off if no use occurs for 10 hours.
BACKLIGHT
Set how long the display backlight stays illuminated.
CONTRAST
Adjust the display contrast.
See the Operation Manual for detailed information about each setting.
HINT
1
2
3
4
5
