background image

Introduction

 

Operation Manual

 

T h a n k   y o u   f o r   s e l e c t i n g   t h e  

 

Z O O M   M O D E L I N G   G U I TA R

AMPLIFIER FIRE-30

 

 (simply called the "FIRE-30" in this manual). 

Please take the time to read this manual carefully so as to get the most

out of this product and to ensure optimum performance and reliability. 

Please keep this manual in a convenient place for future reference. 

 

USAGE AND SAFETY PRECAUTIONS  . . . . . . . . . . . . . . . . . . . . 2
Features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Controls and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

 

 

Input/preamplifier section  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

 

 

Effect section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

 

 

Patch section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

 

 

Output/control section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

 

Connections  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using the FIRE-30  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

 

Basic operation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using effects   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Loading and storing patches  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

 

 

Loading a patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

 

 

Storing a patch   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Using the built-in tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Switching the mode with the foot switch . . . . . . . . . . . . . . . . . . . . . . 16
Returning the FIRE-30 to the factory default settings (all initialize)  . . 17

 

Drive Types and Effect Types . . . . . . . . . . . . . . . . . . . . . . . . . . 18

 

 

DRIVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

 

 

ZNR  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

 

 

MODULATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

 

 

DELAY/REVERB   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

 

Specifications   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Troubleshooting   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Patch List  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Contents

Summary of Contents for FIRE-30

























Reviews: