manualshive.com logo in svg

Zoom F6, Operation Manual

Share
Download
Zoom F6 Operation Manual Download Page 130

130

Setting

Explanation

23.976ND

This is the most common frame rate used with HD cameras 
and other high-definition video recording. The count is slower 
than the actual time by 0.1%.

24ND

This is the standard frame rate used for recording film. This is 
also used with HD cameras.

25ND

This is the frame rate for PAL video. This is used for PAL video, 
which is used in Europe and other regions.

29.97ND

This is a frame rate used for NTSC color video and HD cam-
eras. The count is slower than the actual time by 0.1%. This is 
used for NTSC video, which is used in Japan, the United States 
and other countries.

29.97D

This is an adjusted frame rate that uses a drop frame to make 
NTSC match the actual time. This is used with video for broad-
cast that requires the actual time frame to be matched.

30ND

This is used to synchronize sound with film that is being trans-
fered to NTSC video. This is the standard frame rate used for 
black-and-white television in Japan, the United States and other 
countries.

30D

This rate is used for special applications. This synchronizes 
at 29.97 fps drop frame with film sound to be transferred to 
NTSC. The count is faster than the actual time by 0.1%.

NOTE

Frame rates must be set in advance to match on devices used for all video 
and audio data.

6.

  When done setting, use 

 and 

 to select 

Enter

, and press 

.

■

 Setting the frame rate for internal timecode

3.

 Use   and 

 to select 

FPS

, and press 

.

4.

 Use   and 

 to select the 

frame rate, and press 

.

Summary of Contents for F6








































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands