36
3.
Turn
T
to change the arpeggiator
style.
The STYLE can be set to REPEAT,
SEQUENCE, UP, DOWN, UP&DOWN, or
RANDOM.
Depending on the selected STYLE, per-
formance types and other detailed set-
tings can be made.
4.
If the selected STYLE has parame-
ters 2 and 3, turn
H
in the
SEQUENCE area.
Use
G
and
T
to make the settings
shown on the next page.
This function can be used to make an instru-
ment play automatically when triggered by a
pad. Pressing multiple pads will trigger multiple
instruments in order.
By pressing chord tones in SCALE layout, the
notes in the chord can be played back one at a
time.
■
Operation procedures
1.
CONTROLLER
Press
A
.
The arpeggiator setting screen opens on
the SEQUENCE display.
2.
Use
G
to select ON or LATCH.
This enables the arpeggiator.
When ON is selected, sound will be
output automatically while pads are being
pressed.
When LATCH is selected, sounds will
automatically start output when pads are
pressed and stop when their pads are
pressed again.
HINT
Automatic output in LATCH mode can also be
stopped by pressing
S
.
PA
TTERN mode
Arpeggiator
Arpeggiator
