29
Enter PATTERN mode
Press
Y
to enter PATTERN mode.
Select a pattern
Turn
H
in the SEQUENCE area to select the pattern number.
Confirm the instruments
Tap the pads on the Ring Controller if you want to listen to
the sounds of the input instruments.
When a pad is tapped, its instrument becomes "selected"
and it lights white. The name and parameters of the instru-
ment are shown on the SOUND display.
Press
X
to change the Ring Controller to SCALE layout.
HINT
By pressing
Y
as you tap a pad, you can select its instrument without playing its sound.
1
Start real-time input
End real-time input
Press
R
to enter standby, and press
P
to start real-time input.
In PAD layout, tap the pads of instruments
to input them in time with the pattern that
is playing back in a loop.
In SCALE layout, tap the pads of notes to
input them in time with the pattern that is
playing back in a loop.
1
15
2
16
3
…
Instruments
C
F#
C#
G
D
…
…
Notes
Press
S
to end real-time input.
2
Start step input
While pressing a pad that corresponds
to the instrument to input, press the
0
keys to edit the sequence for that instru-
ment.
In addition, you can tap pads while press-
ing a
0
key to input instruments (in PAD
layout) or notes (in SCALE layout) to input
them at that step.
3
1 2
4…
30
29
31 32
…
1
15
2
16
3
…
Instruments
Steps
PA
TTERN mode
Operation overview
Operation overview
