Zoom ADSL X4, User Manual

Page: 20 / 64

20
X5
ADSL Modem User’s Manual
2.3 LAN Settings
By modifying your LAN ADSL setup and DHCP settings, you can
limit the number of DHCP addresses assigned by the X5. To
change your settings, from the Advanced Setup page click the
LAN Settings button.
LAN IP Address X5’s IP address. Default is 10.0.0.2.
Subnet Mask
X5’s subnet mask address. Default is
255.255.255.0.
DHCP Server Enabled by default.
DHCP Address
Pool Selection
The DHCP Address Pool is based on the X5’s LAN
IP address plus 12 IP addresses; for ex., if you are
using the X5’s default LAN IP address of 10.0.0.2,
the DHCP Address Pool would be 10.0.0.4-
10.0.0.15. Default is System Allocated. A pool of
253 (max.) user-defined addresses is optional.
User Defined
Start Address
Starting address of LAN IP address pool.
User Defined
End Address Ending address of LAN IP address pool.
Lease Time Measured in days/hours/minutes/seconds. Default
is 1 day: After 24 hours, lease expires if not
renewed.
User Mode Default is Multi-User.