8
To disconnect from and unpair a device, see page 9.
Installation and Setup for Macintosh
With Mac OS X 10.3 and later, you do not need to install any
software. The adapter uses the driver embedded in the OS X
operating system. This driver lets you connect wirelessly to
another computer, PDA, modem, or printer.
When this Quick Start was written, the Macintosh driver did
not support A2DP (Advanced Audio Distribution Profile) or
AVRCP (Audio/Video Remote Control Profile). Consequently,
Bluetooth-enabled headphones/headsets were not supported
on the Mac at that time. In the future, Apple may add these
profiles to the OS.
To pair the Adapter with another Bluetooth-enabled device,
follow these instructions.
1
Plug the USB adapter into your computer’s USB port.
2
Open
System Preferences
and click the
Bluetooth
icon.
3
In the
Bluetooth
window, on the
Devices
tab, select
Set
Up New Device
and follow the prompts.
4
When the
Searching for [your device]
window appears,
select the desired device from the list and, if the device
requires a specific passkey, select the
Passkey Options
button.
In the
Passkey Options
window, select
Use a Specific
Passkey
and click
OK
.
