ZOO Fans
1650 38
th
St. Suite 201W, Boulder, CO 80301
Instillation Guide for ZOO Fans VS-‐5A Controller
IMPORTANT SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS:
Installation work and electrical wiring must
be done by qualified person(s) in accordance with all applicable codes and standards.
CAUTION:
The installation of a ZOO Fan must be in accordance with the requirements specified in this installation manual and with
any additional requirements set forth by the national electric code (NEC), ANSI/NFPA 70-‐1999, and all local codes. If you are
unfamiliar with wiring, use a qualified electrician.
WARNING
: To prevent electrical shock and/or injury disconnect fan from power source before you move or service the fan.
Suitable for use with solid-‐state speed controls.
WARNING:
To reduce the risk of fire, electric shock, and injury to persons, ZOO Fans must be installed only with controllers
supplied by ZOO Fans. Other parts cannot be substituted.
CAUTION:
When service or replacement of a component in the fan requires the removal or disconnection of a safety device, the
safety device is to be reinstalled or remounted as previously installed.
WARNING:
Risk of fire, electric shock, or injury to persons during cleaning and user maintenance. Disconnect the fan from the
power supply before servicing.
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
a)
Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.
b)
Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power
from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent
warning device, such as a tag, to the service panel.
