QUICK START GUIDE TO USING DOMINO AUTOMATIC
Please read the complete manual of the stair climber. This does not replace the manual, instead it illustrates certain
phases in schematic form for quick and safe use. Operators must be trained on using the trolley according to the
use and maintenance manual.
CLIMBING PHASE:
1)
Place the load on the base of the trolley (check the maximum capacity of your trolley
not to exceed the permissible load limits).
2)
Tie the load properly with the strap provided.
3)
Use the wheels or crawler tracks to move the load close to the stair to climb or descend.
PLEASE NOTE
: If the load is heavy, turn on the stair climber with the button, press the
"M" key and pull the knob of the joystick towards you so that the trolley tilts the load
toward the operator, thus easing the operation.
4)
Near the stair, bring the load surface to its original position (all closed) if
necessary.
