Zontes ZT350T-D, Maintenance Manual

Page: 28 / 152

28 / 152
D350 Maintenance schedule
I
: inspection
（
Inspect and clean,adjust,lubricate or replace if necessary
） R
:replace
T ：
Tighten
★
:Comment
Check item
Inspectio
n before
driving
km/
mile
Initial
1000/621
Every
4000/2485
Every
8000/4971 Replace regularly
Torque
N.m/kgf.m
Months Initial 3 Every 15 Every 30
Cradle buffer glue
Inspection every 2 years or 20,000
kilometers (12427 mile)
Air filter (filter element)
I R
Engine air inlet filter
R
Bolts and nuts of muffler
T T
M8
：
22±4/2.2±0.4
M10
：
45±5/4.6±0.5
** Spark plug
I
Engine oil
I
★
Note1
Oil filter
R R
* Throttle body
I I
* Throttle cable clearance
I I
Idle speed
I I
* Fuel evaporative pollutant
control system
I
Radiator
I
* Fuel pipe
I I
V belt
I
20,000 kilometers
(12427 mile)
** Braking System
I I
Brake hose
I
Every 4 years
Brake fluid
I
Every 2 years
** Tire
I
** Steering mechanism bolts and
nuts
T
First adjust nut
15±2/1.5±0.2;the second
adjust nut align the first nut
Steering bearing in Steering
mechanism
Every 4000km/2485mile inspection
or clean or lubricate
Front shock absorber
I
Rear shock absorber
I
** Bolts and nuts for body and
engine installation
T T
M12
：
65±5/6.6±0.5
M16
：
80±5/8.2±0.5
Coolant
I I I
3 years or 30,000
kilometers (18641
mile)
Gearbox oil
R R
** Valve clearance (cold
inspection)
In: 0.08
～
0.12mm (0.003
～
0.005
in) Row: 0.18
～
0.22mm (0.007
～
0.009 in)
I
Active and driven wheel
I
★
Note2
*This service is provided by a dealer or a qualified maintenance organization, if the owner has the appropriate tools, service
information, and has a certain understanding of machinery, he can implement it by himself.
**For safety reasons, such items should be provided by dealers or qualified maintenance organizations.
★
Note1: First maintenance for the first 1000 kilometers (621 mile) or 3 months (whichever comes first), second maintenance for
the actual mileage of the instrument when the actual mileage reaches 4000 kilometers (2485 mile), and every 4000 kilometers
(2485 mile), or 15 months thereafter (whichever comes first) Perform a regular maintenance.
★
Note2
：
Active and driven wheel bushings are recommended to be maintained and lubricated every 10000km (6214 mile) with
Shell brand Gadus S3 V220 C2 extreme pressure grease or high temperature resistant No.2 grease of the same viscosity to