3.3 Viewing and setting the floating voltage.
As pictured at right, the floating charge voltage is showed. When the battery
reaches the floating voltage, the controller will maintain the voltage values by PWM
charging mode to avoid overcharge.
long press the button
（＞
5seconds
，
numbers start flashing
）
to finish
the setting of floating voltage values and use the
、
button to adjust the parameter;
calling off the parameter interface after long press the button
again.
(The numbers stop flashing) The floating voltage value will be conserved by controller.
3.4 Viewing and setting of recovery after under voltage
As pictured at right, the recovered voltage is showed. After the controller
performs the function of under-voltage protection, the output of the load will be
recovered as soon as the battery voltage recovers to higher than the under-voltage
value.
long press the button
（＞
5seconds
，
numbers start flashing
）
to enter the setting interface of recovery
after under voltage; long press the button
again
(The numbers stop flashing) to call off the parameter interface after finish setting.
Setting value will be conserved by controller.
www.realsolar.ru (812) 921-52-96,(812) 924-27-83
