Note the port
number allocated to
the printer.
Part 4: Printer Sharing Setup
ZoneAlarm
®
Secure Wireless Router Z100G includes a built-in print server, enabling you to connect USB-
based printers to the appliance and share them across the network (up to four when using computers that
use Windows 000/XP operating system, and one when using computers with a MAC OS X operating
system). The ZoneAlarm
®
Secure Wireless Router Z100G automatically detects printers as they are plugged
in, and they immediately become available for printing. Usually, no special configuration is required on the
ZoneAlarm
®
Secure Wireless Router Z100G.
To configure a printer in your network:
Connect the printer:
•
Connect one end of a USB cable to a USB port at the back of the unit. If needed, you can
use the provided USB extension cord.
•
Connect the other end to your printer.
•
Turn the printer on.
•
Go to http://my.firewall and log in with the administrator username and password. Click Setup
in the left hand menu, and select the
Printers
tab in the top menu.
If the ZoneAlarm
®
Secure Wireless Router Z100G detected the printer, the printer is listed on the page.
If the printer is not listed, ensure that the printer is properly connected, and then click
Refresh
to refresh
the printers list.
The port number appears in the Printer Server TCP Port field. This port number will be used in the
printer configuration on your PC.
Configuring Your PCs to Use the Printer:
For Windows 000/XP Operating Systems:
•
Open the Control Panel window by clicking and then choosing Control Panel.
•
Click Printers and Faxes. The Printers and Faxes window opens.
•
Right-click in the window, and click
Add Printer
in the popup menu.
The
Add Printer Wizard
opens with the
Welcome
dialog box displayed.
