© 2016 ZOLL Data Systems, Inc. All rights reserved.
82
CONFIDENTIAL TRADE SECRETS – DO NOT DISCLOSE.
Z
O
L
L
D
o
c
u
m
e
n
t
a
t
i
o
n
SENSORS
Proper configuration of the Sensors tab is vitally important to the integration of the two systems. Carefully follow
the sensor setup instructions below. (
Until they’ve been configured following the procedure below, the sensor will
be named “Sensor 1” and “Sensor 2”.
Sensor #1
- This sensor is reserved by Digital Ally for a vehicle reverse or backup sensor.
This sensor MUST
always be setup to sense a vehicle reverse input and MUST be configured as follows:
1.
Click “Edit” button for Sensor 1.
2.
Configured the drop-down fields as follows:
3.
Click the “Done” button (where the edit button was) and this will save the configurations for this sensor.
