ZOLL Propaq MD, Service Manual

Page: 51 / 142

Maintenance Tests
9650-0807-01 Rev. C ZOLL Propaq MD Service Manual 45
26.0 Wi-Fi Test (Optional)
Equipment
Dual-Band Router (2.4GHz and 5.0GHz)
Setup Set the router network name for each of the frequency bands.
•
SSID= (your network name, i.e. WATS24, WATS50)
•
Authentication= (your authentication mode, i.e. WPA-PSK, WPA2-PSK, Enterprise)
•
Security Key= (enter your security key, i.e. 123456789)
Do This... Observe This... Pass/Fail
26.1 Turn on the Propaq unit. Verify that the amber wireless icon
appears at the top of the display
screen within one minute.
o o
26.2 On the Propaq unit, do the following to
test at 2.4GHz:
•
Press the More ( ) then the Setup
( ) quick access keys.
•
Use the navigation keys to select
Supervisor > Communications .
•
Use the navigation keys to enable
Wi-Fi , then select Configure .
•
Highlight Add , then in the Add AP
Profile window, select DHCP setting,
and enter the desired settings for
Profile Name (i.e. Test24), SSID (i.e.
WATS24), Authentication, and
Security Key.
•
Press the Display/Home ( ) key to
exit the menu.
o o
26.3 On the main display screen, do the
following:
•
Use the Display/Home ( ) key and
then the navigation keys to highlight
the wireless icon.
•
Use the navigation keys to highlight
Wi-Fi Access Point and select the
profile name you created in step 2. Verify that the Access Point name is
in the
Selected Access Point field.
o o
26.4 Press
to exit the menu.
Verify that the wireless icon turns
green. o o