ZOLL Propaq MD, Service Manual

Page: 47 / 142

Maintenance Tests
9650-0807-01 Rev. C ZOLL Propaq MD Service Manual 41
22.0 Deflation Test
Equipment
Dual lumen NIBP hose, stop watch, NIBP simulator
Do This... Observe This... Pass/Fail
22.1 From the Propaq NIBP Test control panel,
use the navigation keys to select:
•
Close Valve
•
Turn Pump On
22.2 Monitor the pressure reported by the
NIBP Test control panel or the external
pressure standard, and select
Turn Pump
Off as soon as the pressure reaches the
target pressure of 265 +/- 5 mmHg.
22.3 Allow the system to stabilize for 5
seconds.
22.4 Use the navigation keys to select Open
Valve and immediately start the timer.
22.5 Stop the timer as soon as pressure drops
below 15 mmHg.
The pressure should drop within 10
seconds. o o