ZOLL Propaq MD, Service Manual

Page: 35 / 142

Maintenance Tests
9650-0807-01 Rev. C ZOLL Propaq MD Service Manual 29
13.0 Treatment Report Test
Equipment
Fluke Impulse 7000 DP Analyzer (or equivalent)
Do this... Observe this... Pass/Fail
13.1 Connect the multifunction cable (MFC) to the
Analyzer, and turn on the Analyzer.
13.2 Turn on the Propaq unit, and press the
following quick access keys:
a)
b)
c)
The Clear Log window
displays.
13.3 Select Yes . The unit displays a clearing
the log message. o o
13.4 Press the CHARGE button, select 200 joules,
then press the CHARGE button again.
The unit starts to charge, a
charging tone sounds, and the
Shock button illuminates. o o
13.5 Press the Shock button. The unit discharges the shock.
o o
13.6 Wait 20 seconds, press the Treatment quick
access key( ), and select the first code
marker.
13.7 Wait 15 seconds and turn off the unit, then wait
2 minutes and turn on the unit.
13.8 On the Propaq unit, press the following quick
access keys:
a)
b)
c)
The Treatment Summary
window displays. o o
13.9 Highlight the second event and press Select . Verify that a green check mark
displays next to the file. o o
13.10 Select Print Treatment Summary . Verify that the recorder prints
out the defib event and the
code marker snapshot. o o
13.11 Turn off the Propaq unit.
LOG
R
LOG