ZOLL E Series Operator'S Manual Download Page 34

Page: 34 / 133

Operating Controls and Indicators

9650-1210-01 Rev. T

2-9

Manual Mode Activated

AED versions of the E Series will record a “MANUAL
MODE STARTED” summary report event when the
device is switched from Semiautomatic mode to Manual
mode.

Printing a Report

To print the stored information, press the

SUMMARY

button below the screen display. Then press the
corresponding softkey to print a “call” report, summary
report (print chart), or incident log.

The recorder prints all summary report events currently
in memory in chronological order. If the unit is equipped
with the 12-lead option, the recorder will print all 12-lead
patient records currently in memory at the end of the
summary report printout. If the stripchart recorder is on
or the defibrillator is charged, summary report printing is
disabled. In addition:

•

To stop printing a report, press the

RECORDER

button or turn the unit off. You can print an unlimited
number of copies of the report by pressing the

SUMMARY

button and corresponding print softkey

again.

•

If you press the

RECORDER

button while printing a

summary report, the unit stops printing the report.
Press the

RECORDER

button again to begin printing

an ECG trace. The stripchart recorder runs
continuously until the button is pressed again.

•

If you press the

SUMMARY

button and a

corresponding print softkey while a report is already
printing, the current report stops printing and a new
report begins to print.

•

Printing is interrupted if a vital sign alarm occurs (i.e.
HR, SpO2, etc.), the

ANALYZE

button is pressed, or

the defibrillator is charged.

•

If the recorder is out of paper when the

SUMMARY

button and a corresponding print softkey are pressed,
a

CHECK RECORDER

message appears on the

display. Load paper and press the

SUMMARY

button

again to select the report to print.

Printing a Call Report

A Call Report is an abbreviated summary report
containing only those events associated with a specific
call or run. To print a call report:

1. Press the

SUMMARY

button.

2. Press the

Print Call

softkey.

3. Use the scroll keys on top of the unit to scroll through

the list of start times associated with different calls.

4. Press the

Commit

( ) key on top of the unit, or the

Print Records

softkey, to print the events associated

with the selected call.

Printing a Partial Summary Report

To print only a portion of the Summary Report:

1. Press the

SUMMARY

button.

2. Press the

Print Chart

softkey.

3. Press the

Print Range

softkey.

4. Use the scroll keys on top of the unit to scroll through

the list of events.

5. Press the

Commit

( ) key on top of the unit, or the

Print Records

softkey, to print the specified event

and all subsequent events.

Printing an Incident Log

An incident log is an abbreviated list of all major events
recorded in the summary report. You can print out an
incident log that includes the time of occurrence of the
following events:

•

E Series unit powered on

•

Defibrillation advisory messages (for example,

CHECK PATIENT

and

SHOCK ADVISED

)

•

Defibrillation shocks (including energy level)

•

Pacer mode activated