Operation (QuickCharge)
11
)DXOW&RGHVDQG'HILQLWLRQV
When the
FAULT
indicator light illuminates, press and hold the
TEST
button. The illumination of the following indicator
lights together represent a specific defect, identified under the Fault Code column.
'HILQLWLRQRI)DXOW&RGHV
&+$5*(521
%$775($'<
)$8/7
7(67,1*
)DXOW&RGH
ON
ON
OFF
ON
Temperature
OFF
OFF
ON
OFF
Low Constant Current
ON
OFF
ON
OFF
High Constant Current
OFF
ON
OFF
ON
VCC Voltage
OFF
ON
ON
OFF
Low Power Supply Voltage
ON
OFF
ON
ON
Low Battery Voltage
OFF
ON
ON
ON
High Battery Voltage
ON
ON
ON
ON
Overcharge
OFF
OFF
ON
ON
Battery Capacity
ON
ON
ON
OFF
Discharge Time
ON
OFF
OFF
OFF
Constant Current Voltage
OFF
ON
OFF
OFF
Constant Voltage
ON
ON
OFF
OFF
Discharge
OFF
OFF
OFF
ON
Charger
ON
OFF
OFF
ON
Shutdown
Temperature:
Internal charger temperature deviated from the specified range.
Low Constant Current:
Amount of current during a charge was below the specified range.
High Constant Current:
Amount of current during a charge was above the specified range.
VCC Voltage:
Internal five (5) volt supply deviated from the specified range.
Low Power Supply Voltage:
Charging voltage was measured to be below the specified range.
Low Battery Voltage:
Battery voltage measured was below the specified range.
High Battery Voltage:
Battery voltage measured was above the specified range.
Overcharge:
Total delivered charge exceeded the specified range.
Battery Capacity:
Battery’s capacity was measured to be below the specified range.
Discharge Time:
Unit is unable to perform the discharge test.
Constant Current Voltage:
Constant current compliance voltage is below the specified range.
Constant Voltage:
Constant voltage deviated from the specified range.
Discharge:
Test discharge has been ineffective.
Charger:
Safety shutdown (#1) is not operating properly (charge enable).
Shutdown:
Safety shutdown (#2) is not operating properly (shutdown).
