ZOLL AutoPulse 100, User Manual

Page: 19 / 88

Page
1-7
User Guide
1.4.2.5 Select Choice Button
1.4.2.6 Tone Mute Button
Pressing the Select Choice button selects the currently highlighted menu or list
item.
c
The ventilation and pause tones are always generated at the appropriate times by
the system and cannot be turned off, but they can be muted for a short period of
time as set in the Administration Menu (refer to section Section 2.3,
“Administrative Menu: User Pre-set Options,” on page 2-10). Selecting the Tone
Mute button will mute or enable the audible tone feedback generated by the
Platform. When the audio feedback is audible, pressing the Tone Mute button
will mute it. When the audio feedback is muted, pressing the Tone Mute button
will make it audible once again.
Once audio feedback has been muted with the Tone Mute button, it will
automatically be reactivated when one of the following occurs:
1. The Mute Duration time set in the Administrative Menu has expired.
2. You press the Tone Mute button again.
3. You press the Start/Continue button to begin compressions.
4. You press the Stop button during compressions.
5. A low battery condition is reached (refer to Figure 1-5 on page 1-9).
6. You switch between compression modes (refer to Figure 3-13 on page
3-12).
The icon displayed on the User Control Panel display when tones are audible.
The icon displayed on the User Control Panel display when tones are muted.