20X Bar-tacking and Button Sewing Machine(LCD N) Operation and Debugging
56
2.4.5
Change to Other Pattern
Press
key and sewing LED is off.
Press
key to set pattern No.
XY scale rate, speed, etc. can be set in the same way as
[2.4.1 item data setting].
Press
key and sewing LED lights up to enter
sewing status.
Please confirm the pattern shape after pattern selection, in
case the pattern is away from presser foot and needle will
collide with presser foot and break during sewing.
If you switdh to P pattern or C pattern ,you need to switch
pattern mode first.
2.4.6
Bobbin Thread Winding
1)
Press
key and sewing LED is off.
2)
Press
key to lower the presser foot.
3)
Press
key to display winding interface.
4)
Step the pedal to run the sewing machine.
5)
Step the pedal again or press
key to stop the
sewing machine.
6)
Press
key and
key to finish the
winding interface.
Note: when just power on, the winding function is
inactive. Select any pattern and then press
key to search origin before the winding operation.
2.4.7
Use of counters in sewing
(1)
Counter Setting Method
