18 in.
30 in.
Cement
Block
1
Place pump securely in minimum 18 in. x 30 in. basin on a
solid surface such as a cement block.
Gate Valve
Check
Valve
Union
Main
Waste Line
Vent Hole
2
Connect 2 in. discharge pipe with vent hole, union, check valve
and gate valve to main waste line.
GFCI-
protected
receptacle
3
Secure power cord to discharge pipe and plug into a GFCI-
protected outlet.
4
Add water to basin to test operation. Pump should turn on and
off at these approximate levels.
Vent
Pipe
5
Seal basin with lid and install vent pipe per codes.
SW1135 A
On Level
Off
Level
14 in.
9 in.
Zoeller
®
is a registered trademark of Zoeller Co.
All Rights Reserved.
QUICK REFERENCE GUIDE.
SEE INSTRUCTION MANUAL FOR
COMPLETE DETAILS.
SEWAGE PUMP
MODEL #1261-0001
