ZOE PPM3, User Manual

Page: 170 / 214

17-4
N i g h t i n g a l e P P M 3 U s e r ' s G u i d e April 2019
Strip Chart Recorder Option
17.4. Trend Recordings
When the recorder option is installed, the recorder can print out a Trend Report.
This report contains the same information that is presented in the trends display,
with the following additions:
•
A header that includes a Trend Report title and the date/time of the trend
report.
•
The date is displayed along with the time of trend data entries.
•
All trend data entries are printed (including those more than 24 hours old).
•
Temperature is printed in the currently active units of measure along with
the units of measure.
•
A "Patient Demographic" trailer is printed. This provides a space for the
user to write the patient’s name and id, as well as comments. If patient
has been admitted, the patient’s name is printed.
17.5. Recorder Messages
If the recorder door is open, a technical alarm tone sounds and the message
"Recorder door open" is displayed in the bottom display message area.
If the recorder is out of paper, a technical alarm tone sounds and the message
"Recorder out of paper" is displayed in the bottom display message area.
When the recorder option is installed but the recorder is not physically connected,
a technical alarm tone sounds and the message "Recorder problem detected" is
displayed in the bottom display message area.
If the monitor senses a recorder error condition, a technical alarm tone sounds and
the message "Recorder problem detected" is displayed in the bottom display
message area.
When the "Recorder problem detected" message is displayed, the cause of the
failure is logged in the event log for viewing by service personnel.