Page 50 / 67
613770 -
Edition 1
V-2-6-
Navigation lights
Use this button to switch on the navigation lights.
It has 3 positions.
Off position
White light position
White light, red light and green light
position.
V-2-7-
Wiring an accessory
1º/
Choose a free fuse location.
2º/
Connect the power supply of your accessory to the terminal corresponding to this slot using a
6mm female tab type terminal.
3º/
If you have to add cable for the connection, use cable with a cross-section of at least 1.5mm² that
complies with "marine" standards (UL1426 or SAE J378 or SAE J1127 or SAE J1128 or more generally
meeting ABYC and/or EC standards).
4º/
Connect the earth cable of your accessory to the ground terminal strip using a Ø5 "ring terminal"
(same comment as for the cable above).
5º/
Insert an ATO type fuse with a max current of 15A and greater than the load current of your
device.
Red wire
Dev
ic
e
1
Dev
ic
e
2
Direct wiring
Wiring with
switch
+
-
Red wire
Red wire
Red wire
18
6
1
2
3
Summary of Contents for OPEN 3.1
