Zodiac eXO Series, Installation Manual, Page: 19 / 28

Page 19
Page 18
eXO
®
| Installation Manual
8.2 Aux/Lights
The chlorinator is capable of controlling devices in
addition to the filter pump. The equipment must be
connected to the chlorinator using the appropriate
auxiliary line:
Aux 1: for equipment connected to the high voltage
supply (230 V) (not applicable for Australia).
Aux 2: for equipment connected to the low voltage
supply (12/24 V).
The following functions are available in the
AUX/LIGHTS menu for auxiliaries 1 and 2:
● Turn the equipment on/off
● Program a timer (See section 8.7.6 for details)
For Australian products, in order to control
the light transformer, an additional switching
box is required. Please contact your local pool
care professional for this relay box, item code
WW000222.
1. Remove the lower cover from the housing.
2. Attach the 2 x core wires from the switch box
to the terminal bar marked ‘AUX 2’.
3. Replace the cover/s.
4. Plug the switch box into any
available 240V GPO.
5. Plug the light transformer directly into the
socket located in the switch box. This will now
control the light directly from the chlorinator.
8.2.1 Assign Lights
1. Press .
2. Use to select “Aux/Light” then press .
3. Use to select “Assign Lights” then press .
4. Use to select “Aux 2” then press .
5. Use to select “Yes” then press .
6. Use to select “White Light” or “Color
Light” then press .
7. Press to exit.
< -AUX/LIGHTS
-PROGRAMMING
-LOW MODE
-SLAVE MODE
-REVERSING
-HELP MENU
-LANGUAGE
MAIN MENU
<
AUX/LIGHTS
-ASSIGN LIGHTS
-AUX 2
-AUX 1
<
ASSIGN LIGHTS
-AUX 2
-AUX 1
<
AUX SETUP
AUX 2 = LIGHT?
YES
NO
<
AUX 2 = LIGHT
-WHITE LIGHT
-COLOR LIGHT
8.2.2 White Light Operation
1. Press .
2. Use to select “Aux/Light” then press .
3. Use to select “Aux 2/Light” then press .
4. Use to select “On”, “Off”,
or “Set Timers”, then press .
5. Press to exit.
<
AUX 2
-OFF
-ON
-SET TIMERS
8.2.3 Color Light Operation
1. Press .
2. Use to select “Aux/Light” then press .
3. Use to select “Aux 2/Light” then press .
4. Use to select desired color, “Off”,
“On” or “Define Color”, then press .
5. If “Define Color” selected, use to select
desired color then press .
6. Press to exit.
<
AUX 2 / LIGHT
-OFF
-ON
-DEFINE COLOR
<
COLOR LIGHT
-ALPINE WHITE
-SKY BLUE
-COBALT BLUE
-CARIBBEAN BLUE
-SPRING GREEN
-EMERALD GREEN
-EMERALD ROSE
-MAGENTA
-VIOLET
-SLOW SPLASH
-FAST SPLASH
-AMERICA
-FAT TUESDAY
-DISCO TECH
Note: colour sequence is relevant for Zodiac colour
lights only. If other manufacturers lights are
installed the colour selection will vary