background image

 WARNING

INSTALLATION AND 

OPERATION MANUAL

H0303600 Rev C

FOR YOUR SAFETY - 

This product must be installed and serviced by a contractor who is licensed and qualified in pool 

equipment by the jurisdiction in which the product will be installed where such state or local requirements exist. The 

maintainer must be a professional with sufficient experience in pool equipment installation and maintenance so that 

all of the instructions in this manual can be followed exactly. Before installing this product, read and follow all warning 

notices and instructions that accompany this product. Failure to follow warning notices and instructions may result in 

property damage, personal injury, or death. Improper installation and/or operation will void the warranty.  Improper 

installation and/or operation can create unwanted electrical hazard which can cause serious injury, property damage, 

or death. 

ATTENTION INSTALLER - 

This manual contains important information about the installation, 

operation and safe use of this product. This information should be given to the owner/operator of this 

equipment.

Jandy Pro Series Levolor

®

 

Electronic Water Leveler 

Models K-1100, LX2, K-2300, and LEV110CK/2G

Sensor

Filling

Power

DO NOT OPEN

NO USER SERVICEABLE PARTS INSIDE

SENSOR

PWR

FILL

II

Electronic

Water Levelor

The next generation 

in automated controls.

SM

TM

Patented

High Voltage Compartment

No user service parts inside

Model No. K-2300

Sensor I

Sensor II

Filling 1

Filling II

Power

K-1100

LX2

K-2300

Sensor

Filling

Power

Model No. LEV110CK/2G

LEV110CK/2G

Summary of Contents for Jandy Pro Series Levolor

























Reviews: