ZMIO300 Series Hardware Manual Version 1.8
4
Note
Pay attention not make metal shavings and wire head fall into
the hardware wiring board, if falls into, there will cause fire,
malfunction, false operation.
Check if there is not foreign matter on the hardware wiring
board after installation. If it is, will cause operate abnormally,
then appear fire, malfunction and false operation.
The products must be installed with mounting bracket tightly
and firmly. If the controller is not installed well, it will cause
wrong motions, malfunction and fall off.
Wiring
Danger
The person who wires this product must be trained the
knowledge of electronic technology and equipment.
When wires, external power supply must be disconnected, then
to operate, or will cause electric shock, equipment malfunction
and wrong actions.
When conducts power and runs after wiring, attached
terminals must be installed. If this not did, there might be
electric shock.
Cable terminals should be well insulated. And make sure cable
is installed in the terminals, the insulation distance between
cables won’t decrease. Or will cause electric shock and
equipment damage.
Note
Pay attention not make metal shavings and wire head fall into
the hardware wiring board, if falls into, there will cause fire,
