ZMC464 Motion Controller User Manual V1.5
Highest Communication Ratio
12Mbps
Max Output Current of 5V
500mA
Whether Isolates
No
3.8.
ETHERNET
ZMC464 motion controller has a 100M network port, and it supports MODBUS_TCP
protocol and custom communication, the default IP address is 192.168.0.11. The pin
definition is as follows:
The Ethernet port of the controller can be connected to a computer, HMI, etc. through
an Ethernet cable, and using point to point connection method. The schematic diagram
is as follows:
The controller can also be connected to the interchanger through an Ethernet cable,
and then use interchanger to connect to other devices, then multi-point connection can
be achieved. The schematic diagram is as follows:
Summary of Contents for ZMC464
Page 1: ......