ZMC408CE Motion Controller Hardware Manual V1.5
(3)
State values of relative input ports
can be read directly through “IN” command, also,
it can be read through
“ZDevelop/View/In”. Please refer to “ZBasic” for details.
(4)
Latch function can be set and triggered
through “REGIST” instruction, in software,
use REG_INPUTS to configure. Please refer to “ZBasic” for details.
3.3.
OUT Digital Output & PWM Terminal
The digital output adopts 2 sets of screw-type pluggable terminals with a spacing of
3.81mm, and the PWM and hardware comparison output functions are integrated in
digital output signal.
→
Terminal Definition
Terminal
Name
Type
Function 1
Function 2
Function 3
E+24V
/
Output
freewheeling
cramp port
/
/
E5V
/
External 5V
power output,
max is 300mA
/
/
OUT0
NPN
Leakage
Output 0
PWM 0
Hardware Comparison Out 0
OUT1
Output 1
PWM 1
Hardware Comparison Out 1
Summary of Contents for ZMC408CE
Page 1: ......
