XPLC300 Motion Controller Hardware Manual V1.5
1.4.
Hardware Installment
→
Unit: mm
→
Installation Step:
➢
Please use 35mm standard DIN guide rail.
➢
Open guide rail buckle of ECAT communication module, then embed the controller in
the DIN guide rail.
➢
Press fit guide rail buckle of ECAT communication module, then fix the controller in
the DIN guide rail.
Installation
attention
⚫
Non-professionals are strictly prohibited to operate. Specifically,
professionals who had been trained related electrical equipment,
or who master electrical knowledge.
⚫
Please be sure to read the product instruction manual and safety
precautions carefully before installation.
⚫
Before installation, please ensure that the product is powered off.
⚫
Do not disassemble the module, otherwise the machine may be
damaged.
⚫
Avoid direct sunlight installation.
Summary of Contents for XPLC300
Page 1: ......
