ECI2410 Network Motion Control Card Hardware Manual Version1.4
12
2.2.3
Ethernet Interface Signal
It supports one group 100M Ethernet communication. When the green
lights constantly, which means there connects and works under full duplex
modes. When the yellow light blinks, which means it is communicating
now.
2.2.4
Analog input and output signal
PIN
Name
Description
1
DA0
0-10V analog output 0, resolution is 12-bit
2
DA1
0-10V analog output 1, resolution is 12-bit
3
ADGND
Analog GND
4
AD0
0-10V analog input 0, resolution is 12-bit
5
AD1
0-10V analog input 1, resolution is 12-bit
The load
impedance externally connected to DA output is ≥3.3KΩ. The
load impedance externally connected to AD output is ≤0.3KΩ.
