ECI1A00 Network Motion Control Card Hardware Manual Version1.0
9
2.1.1 Order Information
Model
Specification
ECI1808
8 axes, point to point, electronic cam, linear interpolation, circular
interpolation, continuous interpolation
ECI1A00
10 axes, point to point, electronic cam, linear interpolation, circular
interpolation, continuous interpolation
2.2 Wiring Reference
➢
ECI1A00 has 10 axes, virtual axes can reach 12, which can extend axis through
expansion module.
➢
ECI1A00 has 46 general inputs and 20 general outputs.
➢
ECI1A00 has one RS232 serial port and one Ethernet interface.
➢
ECI1A00 supports 24V handwheel input.
➢
ECI1A00 has one CAN bus interface, which supports connect with expansion
module and motion controller through ZCAN protocol.