Product Manual - ZMORPH i500
63
Firmware upgrades
13.2 Updating firmware
How to update the firmware on Zmorph i500:
1. Create a catalog “updates” on a USB flash drive and drag the
Zmorph update file (.raucb format) into it. You can download the
update file at the Zmorph Knowledge Base: zmorph3d.com/support .
2. The machine should be turned off. Insert the USB flash drive into
the USB slot (near the right top corner of the LCD screen).
4. Select the update file from the
list and press “OK” to confirm the
update.
3. Turn on the machine, after that
an update screen will pop up.
Select “Yes” to proceed with the
update procedure (if you don’t
manage to do it in 10 seconds, the
machine will skip the update menu,
in this case, reboot the machine to
repeat the update procedure).
