Zmodell Marklin 87210 User Manual Download Page 1

Technical data

Operating mode:

 DCC/MM/SelecTRIX 1 and 2

Max. voltage:

 12 V

Type of LEDs:

 Warm white SMD 0402/RGB SMD 0807

The board is equipped with 2200 µF power buffer.

Functions

F0

 - Directionally controlled tail lights (if installed)

F1

 - Disco lights

F2

 – Lighting of entrance area

F3

 – Normal lighting for dance area

F8

 – Sound (only with optional sound module)

Default address:

 3 (DCC), 01 (SelecTRIX)

Warm white interior lighting (F2, F3) is connected to the 
logical level outputs (unamplified); thus, its brightness 
cannot be adjusted and already set to the optimal value.

Directionally controlled red tail lights optionally available 
(no external resistors required; please inquire your dealer 
or manufacturer). The brightness of the red tail lights is 
adjustable via configuration variables (CV) in DCC mode:

  CV     Function                                     Range     Default

  52     Brightness of tail lights                0-31          31

Installation

1. Carefully remove the roof of the M

ä

rklin 87210 

Entertainment Car.

2. Unscrew two screws and remove original analog 
circuit board.

3. Install the digital circuit board and fix it with two 
screws (don’t overtighten them). Make sure the spring 
contacts coming from the floor reliably touch soldered 
pads on the bottom side of the circuit board.

4. Carefully install the roof back to its place (please note 
that the roof can be installed only in one position; check 
corresponding pin and hollow on the body of the car and 
the bottom side of the roof).

Programming

This digital circuit board comes already programmed; no 
adjustments needed. To reset decoder to the factory 
defaults, “8" should be written to CV8. In order to restore 
all functions after reset, the following values should be 
written manually: CV33=1, CV34=2, CV35=4, CV36=16, 
CV37=32, CV38=128, CV39=64, CV42=8, CV47=4, 
CV64=16, CV137=2.

Digital interior lighting board is based on Doehler & 
Haass FH05B function decoder. For more info about 
programming, visit Doehler & Haass official website:

https://doehler-haass.de

ATTENTION:

 This product is intended only for 

experienced users! Please perform all operations with all 
precautions that apply to work with ESD sensitive 
devices. The manufacturer is not responsive for any 
damage to the train model and/or digital decoder caused 
by improper installation or exceeding the maximum 
allowed operating voltage.

       facebook.com/zmodelltrains
Email: [email protected]

Made in Ukraine

Art. No: ZDL-MRK-87210

M

ä

rklin and SelecTRIX ® are registered trademarks of Gebr. M

ä

rklin 

& Cie. GmbH, Postfach 860, D-73008 G

ö

ppingen, Germany

Doehler & Haass ® is a registered trademark of Doehler & Haass 
GmbH & Co. KG, D-81249 Munich, Germany

1:220 

Digital interior lighting board for M

ä

rklin 87210 Entertainment Car

Track 1

Track 2

Track 1

Track 2

Sound Module -

Sound

Red tail light LEDs

Red tail light LEDs

Reviews: